|
Body Measurements: - length - 18 3/4" (inches) - lower bout - 16" - upper bout - 11 1/2" - waist - 9 1/4" - sides - 1 5/8"
Neck Measurements: - fret scale - 24.562" - number of frets - 22 - fretboard cutoff - 23rd fret - fretboard radius - 12" - nut - 1 5/8" - 19th fret - 2 1/8" - string separation at bridge - 2 1/32"
Tops: fully hand carved solid select quilted maple, or, European curly maple; or, European spruce
Backs: fully hand carved solid select mahogany; or European curly maple
Sides: to match backs
Necks: select mahogany
Fretboards, headcap face, pickguard: solid ebony
Bindings/Purflings: solid ebony and curly maple combinations - all fabricated in shop - 5 piece: around tops - 3 piece: around backs - 2 piece: around fretboard, f-holes, peghead and pickguard
Position markers:MOP triangle sequence on fretboard with 2mm MOP side position dots
Neck particulars: 2-way LMI adjustable truss rod with carbon fiber rods on each side from peghead to 21st fret
|
Pickups: custom Lindy Fralin humbuckers; 8K at neck and 9K at bridge
Frets: jumbo
Nut: bone
Bridge: tuneamatic, nickel
Tailpiece: stop tailpiece, nickel
Switch: lever, 5-way P-Model Megaswitch yielding 1) Bridge humbuckers 2) Inner coils in parallel 3) Outer coils in series 4) Outer coils in parllel 5) Neck humbucker
Controls: Master volume, master tone
Jack: flushmount, located in side on treble side lower bout
Finishes: - Quilt Fusion: sunburst top with just darker than natural mahogany sides, back and neck - Flame Fusion: sunburst top with just darker than natural mahogany sides, back and neck - Spruce Fusion: blondeMachine Heads: locking Sperzel tuners, black
Case: TDK
Options: - Bigsby setup with Bigsby tremdo tailpiece and Schaller roller bridge and delrin nut - Total sunburst on Spruce Fusion - 3-way toggle switch with 2 volumes and 2 tones - Custom spec. pickup strengths - Gold hardware and tuners - Cedar Creek or Calton custom case
|