Destroy All Guitars Mailing List Form

DESTROY ALL GUITARS WILL NEVER SHARE YOUR INFORMATION





() -
 

McKay Natural Sunrise 19

McKay Natural Sunrise 19
sold
$7,500.00

available to order

For sale is a gorgeous McKay natural Sunrise 19. The McKay Sunrise guitars are now in the construction phase. These guitars were designed over a period of months with several mock ups and changes...

DESCRIPTION:

For sale is a gorgeous McKay natural Sunrise 19.

Sunrise 19 and Sunrise 16 overview
These guitars were designed over a period of months with several mock ups and changes. Holding each guitar feels similar, in a way, because they have the generous "upper half." Both guitars have a longer upper horn and deeper cutaways in the treble end for better balance and access. Playing the "16," your left hand reaches out to play the "cowboy chords" and finds them close to the body, while diving in to the high frets, the thumb conveniently hits the body at the 16th fret, with plenty of space in the cutaway, unimpeded, up to the 19th fret. Playing the Sunrise 19, you will find the access to the upper frets very nice with the longer shaft and 19 frets on the bass side and 20 on the treble. The "cowboy chords" are a bit farther out though. Choose your poison.

Construction
Those players who are familiar with McKay guitars will know Ken McKay is fond of laminated construction to create a semi-hollow guitar. This is opposed to carving solid wood to make the plates. Ken has done both and is not an advocate of either one over the other but he does advocate using materials to get the sound desired. Ken laminates his own plates using custom sliced maple veneers of different thicknesses to engineer the stiffness across and along the plates. This helps him get a guitar that can go to 10 with a Marshall stack and sustain a note from now 'til sunrise. Ken incorporates high grade wood because he feels it is important! This includes straight grained spruce for contour bracing, soft, light maple for the center block, old growth mahogany for the neck, Brazilian rosewood for fingerboards, holly headstock veneers, and mahogany kerfed linings and blocks.

The Sunrise 16 has a shorter neck that joins the body at the 16th fret. This is the familiar single cutaway feel where the "cowboy chords" are reached closer to the body than the Sunrise 19, which joins the 19th fret. This of course gives a few more frets clear of the body for the Sunrise 19 which is also similar to many semi-hollow guitars and the very famous ones designed by Ted McCarty in the late '50s. Also, there is a size difference between the two, with the Sunrise 19 being longer behind the bridge and a bit wider too. The two guitars are adorned differently, but on purpose. The Sunrise 19 has distinctive "dots" inlayed into the fingerboard while the 16 has oval, yet vintage inlays. These guitars are made to be as lightweight as possible, around 8.5 pounds or less, and will take a leap backwards for pickup and wiring schemes. Of course, anything can be done as Ken is a custom maker. He prefers Seymour Duncan to make his pickups as well as some of the other great pickup makers who can replicate a good PAF.

SPECS FOR THIS GUITAR:

- Thin line construction with a solid block down the center
- Four ply maple top and back plates
- High-grade spruce contour braced
- Old-growth mahogany neck
- Rosewood fingerboard
- Cellulose nitrate dots on fingerboard, tortoise dots on the edge
- Neck thickness 0.9" at first fret, 1.01" at 12th fret

- Neck joins body at 19th fret
- Pearl headstock inlay and logo
- Ivory colored ABS binding
- Five ply wide bevel pick guard
- Two vol, two tone CTS pots
- Vintage style wiring
- Seymour Duncan antiquity pickups 
- Nitrocellulose lacquer

PRICING INFO:

- $7,500.00

{youtubegallery=videosetname,PlayerGrid}